HGT

CN

Service


1. In the process of warming the house, try to reduce the opening of doors and windows, especially in the process of warming up.


2. When you leave or in a room where no one is staying, you can adjust the temperature to between 12°C and 15°C or the corresponding gear, because when you turn off the system and then restart, the temperature rises slowly. Frequent opening or closing does not work. Realize energy savings.

3, due to the side of the house more windows, heat dissipation will increase, so the choice of dark thick floor curtains can also block the loss of infrared. In addition, the number of indoor furniture items is also related to power saving. Furniture is more power-efficient, while indoor air-conditioning is less expensive.

4. More than 65% of Henkel's heating energy is converted into infrared radiation energy. Unlike air conditioning, plumbing convection, and conductive heat energy, it is recommended that the indoor temperature be set at 18°C~20°C. A 1°C increase in temperature will increase energy consumption by 7%.

5, Henkel electric heating film electrical energy into heat, the conversion rate of 99%. Therefore, whether the power saving has nothing to do with the electrothermal membrane system. If it is necessary to save electricity, measures for house insulation should be strengthened. House insulation is the key to energy conservation.
    ✔ Walls, ceilings, doors and windows plus insulation or insulation film ✔ Cotton padded curtains ✔ Double insulating glass ✔ Enter the door to close the door in time

6, the following situations will increase power consumption
         ▲The high level is very high, and the space is large ▲There are no heating households around, and they are cold walls.
         ▲The first heating season ▲North facing ▲Bottom ▲Top
Online message
Return top